The product is a 4channel passive video receiver. It allows transmit 4channel color or mono PAL、NTSC、SECAM

video format over UTP Cat 5/5e/6.In the project. It can work with SECTEC series passive or active video transmitter.

It is featured with long distance transmission, high transmission quality, strong anti-electromagnetic radiation capability.

It is widely used in video surveillance and control system;

 

Employing the advanced DSA technology, it can adapt to the cable length and adjust the video signal gain control

automatically, identify its polarity and compensate the frequency bands. Video quality is more Human-based.

 

A set of complete UTP transmitting solution is provided. Its advanced technology in UTP transmitting field and plenty

producing lines offer more options in CCTV system transmission and bring totally new worthy experience to you.

 

Sectec twisted pair transceiver employs advanced processing technology, zooms out and compensates the attenuation

of video signal levels and different frequencies, keeps the original video sharpness, color and resolution, realizes a good

transmission of middle and long-distance video signals and solves the problem that coax cant reach the long transmitting

distance. Sectec twisted pair transceiver employs advanced processing technology, zooms out and compensates the attenuation

of video signal levels and different frequencies, keeps the original video sharpness, color and resolution, realizes a good

transmission of middle and long-distance video signals and solves the problem that coax cant reach the long transmitting

distance. If work with Sectec series passive transceiver, ST-104 transmission distance is up to 300m and if working with active

receiver distance can be up to 1500m.

 

Sectec twisted pair transceiver transmits video, audio, data and power, which makes it convenient to form a multi-class monitoring system.

 

UTP is softer and lighter than coax, making its easier, more convenient for wiring installation. Specially in integrated systems,

cable utilization rate is increased and design change is decreased greatly. Meanwhile, UTPs price is lower than coaxs, which

greatly cuts down the cost for wiring installation.

 

Exceptional interference rejection; no interferences between signals; even under strongly interfering environments,

good video can be transmitted.

 

Built-in surge protection, lighting protection and other protection settings, reliable and stable, making working system safer and more reliable.

 

Model		ST-104
Product Name		4 Channel Passive Video Transceiver Hub
Applied  Devices		CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video	Video Format	PAL, NTSC, SECAM
	Operating Frequency	DC to 8MHz
	Max Distance	0-300m(with pasive products) 0-1500m(with active products)
	CMRR	60 dB typ
	Impedance	Coax,  BNC    75Ω unbalanced
		UTP, 100Ω balanced
	Attenuation	0.3 dB typ
Wire Type	Network Wiring	One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
	Category Type	2 or better
	Impedance	100 ± 20 ohms
	DC Loop Resistance	52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance	19 pF/ft max (62 pF/m max)
Power	No external power required
Connector	Video input/output	Female BNC connector, RJ45, Screw terminal block
Protection	Surge Protection	renewable solid state surge protection
	Anti-Interference	>60dB
	Communication Port Surge Protection	2KV(different mode) 4KV(common mode) per:IEC 61000-4-5
	Coaxial Video Connector Surge	2KV Per:IEC 661000-4-5
	ESD	1a contact discharge level 3 1b air discharge level 3 per:IEC 61000-4-2
Mechanical	Housing	Galvanized
	Body Color	Silver
Environmental	Operating Temperature	-10º ~ 50º C
	Relative Humidity	0~95% (non-condensing)
	Storage Temperature	-30º ~ 70º C