The ST-PV236 video &power balun +12VDC converter is a passive (no-amplified) video transceiver combined with a 24VAC to 12VDC converter. Designed to fit on the back of a fixed 12VDC camera, this unit is architected to convert 24-36VAC power from the control room, while delivering real-time baseband (composite) video at extended distance, all over one 4-pair UPT cable.

 

The unparalleled interference rejection and low emission of ST-PV236 allows video and low voltage power to coexist within the same 4 pair cable, using structured (EUA568B) wiring practices. Its is recommended that the 24-36VAC not share the same jacketed wire bundle with telecom or datacom signals.

 

ST-PV236 eliminates costly and bulky coaxial cable, allowing live CCTV color video signal up to 500m, data& power transmission up to 300m while used as a pair.

 

ST-PV236 has built-in surge suppression to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.

 

Security monitoring system. Multimedia network teaching system.  Medical monitoring display system.  Industrial automation control system. Banking securities. Financial information display system. Remote network server monitoring. Department store security. Casino security.  Hospitals, airports and banks. School campuses and etc.

 

 

Product Name		ST-PV236
		1 channel passive video &power transceiver
Applied  Devices		CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video	Video Format	PAL, NTSC, SECAM
	Operating Frequency	DC to 5MHz
	Transmission  Distance	Video: UTP Category 5e (24AWG) Color: 400m  B&W: 600m
	Common-mode/Differential-mode rejection	15 KHz to 5 MHz    60 dB typ
	Impedance	Coax, Male BNC  75Ω unbalanced      UTP,RJ45   100Ω balanced
	Attenuation	1.5 dB typ Max
Wire Type	Network Wiring	One Unshielded Twisted Pair (for each video signal)  24-16 AWG (0.5-1.31mm)
	Category Type	2 or better
	Impedance	100 ± 20 ohms
	DC Loop Resistance	52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance	19 pF/ft max (62 pF/m max)
Power	Power Input	No external power required
	Power transmission	Input:12-36VAC output: DC12V 400~500MA  300m
Connector	Video input/output	Male BNC connector, RJ45
Protection	Surge Protection	renewable solid state surge protection
	Video Input	2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
	Video Output	2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Mechanical	Housing	ABS engineering plastic
	Body Color	Black
	Dimensions(L*W*H)	57x39x20 mm
	Net Weight	50
Environmental	Operating Temperature	-20º ~ 50º C
	Relative Humidity	0~95% (non-condensing)
	Storage Temperature	-40 ~ 150º C