Overview

ST-2116R is a 16 channel active video receiver. It adopts the Cat5/5e/6 cable as the transmission medium,

being able to receive single channel color or B/W PAL、NTSC、SECAM video format in real time.

 

The RJ45 connector of ST-1016R allows easy connection of UTP cable input. It receives 16 channel video signal

from camera end via one UTP cable at distance up to 1500m when used with active video transmitter. The

transmission distance reaches up to 500m when used with passive video transmitter.

 

ST-2116R has distance adjustment as well as built-in surge suppression to protect video equipment against

damaging voltage spikes. Its Integrated Ground Loop isolation prevents annoying "hum-bars" common with

long distance installations and its excellent crosstalk and noise immunity provides quality video up to the

maximum distance. The superior interference rejection and low emissions of the ST-1016R allow video signals

to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use

of a shared or existing cable plant.

 

Features
1.    Properties : 16 Channel active video receiver
2.    DSA (Distance Self-Adapting) Technology
3.    Distance: 1500m via UTP cable if working with active transmitter. 500m if working with passive video transmitter.
4.    Safety: Exceptional interference rejection; no interferences between signals; even under strongly interfering

environments, good video can be transmitted
5.    Higher cable utilization rate
6.    Video format: NTSC, PAL & SECAM video format compatible
7.    Power: 12VDC power supply
8.    Connector: BNC connector, RJ45
9.    Compatible with all cameras with built-in UTP transmitter
10.  Flexible and convenient wiring cuts down project cost
11.  Full ground-loop immunity
12.  Adjustable switches
13.  Adjustable brightness & sharpness transmitter
14. Receiver 4 range distance at option
15. 432*185*44mm
16.  Black galvanized housing

Applications
Security monitoring system.  Multimedia network teaching system.  Medical monitoring display system.  Industrial

automation control system. Banking securities. Financial information display system. Remote network server

monitoring. Department store security. Casino security.  Hospitals, airports and banks. School campuses and etc.

 

Product Name		ST-2116R (R: receiver)
Function		16ch active video receiver
Applied Devices		CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video	Video Format	PAL, NTSC, SECAM
	Operating Frequency	Signal Band: 250MHz(-3db)           Balance Band: DC to 6MHz
	Transmission distance	UTP Category 5e (24AWG)  Color: 1200m (with active transmitter)
		UTP Category 5e (24AWG) Color: 300m (with passive transmitter)
	Common-mode/Differential-mode rejection	75 dB typ
	Attenuation	1.5 dB Max
	Impedance	Coax, female BNC:  75Ω unbalanced
		UTP, screw terminal block:  100Ω balanced
	Video Distance Adjustment	Adjustable knob for brightness and contrast
Wire Type	Network Wiring	One Unshielded Twisted Pair (for each video signal)   24-16 AWG (0.5-1.31mm)
	Category Type	2 or better
	Impedance	100 ± 20 ohms
	D  DC Loop Resistance	52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance	19 pF/ft max (62 pF/m max)
Power	Adaptive Voltage Arrange	DC12V Power Supply is recommended
	Power Consumption	<500mW
Connector	Video Input	BNC connector, RJ45
	Video Output	Male BNC Connector
Protection	Surge Protection	renewable solid state surge protection
	Ground Isolation	Ground connection available for STP or Ground loop removal
	Video Output	2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
	Video Input	2KV(different mode), 4KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
	Video Input Protection for Over Current	Protection for over 100mA current Max
Mechanical	Housing	Metal
	Body Color	Black
	Net Weight	2200g
Environmental	Operating Temperature	-10º ~ 50º C
	Relative Humidity	0~95% (non-condensing)
	Storage Temperature	-30º ~ 70º C