产品搜索:
中文版 | 英文版

产品类型
工程宝
双绞线传输器
防雷器
视频抗干扰系列
接地隔离器
BNC 转接头
红外灯
防护罩
云台/云镜控制器
支架
云台
音视频分割器
视频转换器
球机控制键盘
线材系列
电源
视频加权放大器
VGA双绞线传输器

产品中心  >> CCTV产品配件 >> 双绞线传输器




16CH Acitve receiver,transmission distance:Color: 1200-1600m. B/W: 1800-2500m;High quality singal transmission, unti-jamming...

 
Features:
·Compact rack mountable 19’’ 1U high enclosure features 16 channels with 2 outputs per channel
·Full-motion CCTV video at distances up to 3000ft(1km)when used with any passive SECTEC transceiver
or hub;1 mile(1.6km) when used with ST–352T active transmitter
·RJ45 connectiviy with optional ST-8016R RJ45-to-screw terminal adaptors(included)
·Exceptiona interference rejection
·Built-in transient protection and ground lifting
·Built-in sharpness and brightness controlsl, Green Active LED for each port
·Compatible with qualified UTP camera
·Includes sixteen 2ft(60cm) coax jumper cables, rackmount hardware and four ST-8016R adaptors
·Linited lifetime warranty
 
The ST-8016R is a 16 channel active(amplified) distribution amplifier device that allows the transmission of
real-time monochrome or color video on up to one mile(1.6km) using Category Unshielded Twisted-Pair(UTP) wire.
 
The 16 channel distribution amplifier hub features dual outputs per channel for large high-density applications.
1U rack-mountable active receiver distribution amplifier hubs provide signal conditioning in the form of
ground-lifting, distance EQ, and transient protection.
 
The unparalleled interference rejection and low emissions allow long run video signals to co-exist in the same
wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing
cable plant. Ground-lifting ensures no annoying “hum-bars” when ground potential differences exist. With
built-in transient protection, damaging voltage spike problems are eliminated. Perfect for larger CCTV installations
where port density and camera number growth are prevalent.
 
VIDEO
Frequency Response
DC to 5MHz
Common-mode/Differential-mode rejection
15 KHz to 5 MHz    60 dB typ
Impedance
Coax, Male BNC  75Ω unbalanced      UTP,RJ45   100Ω balanced
WIRE TYPE
Network Wiring
One Unshielded Twisted Pair,
24-16 AWG (0.5-1.31mm)
Category Type
2 or better
Impedance
100 ± 20 ohms
DC Loop Resistance
52 ohms per 1,000ft (18 ohms per 100m)
Differential Capacitance
19 pF/ft max (62 pF/m max)
POWER
115/230V,built-in,50/60Hz 160mA
35 watts 125 BTU/hour
Power inlet
IEC with molded power cord(included)
Protection
5*20mm type T fuse 160mA 250V
ENVIRONMENTAL
Ambient Temperature
+32 to +122 º F(0 to 50º C)
Humidity(non-condensing)
0~95%
Transient Immunity
Per ANSI / IEEE 587 C62.41
MECHANICAL
Weight
5.5lb(2.5kg)
Dimensions
43*4.3*20(cm)
ACCESSORIES
Mounting
Rack mount”L” brackets for front,rear,or wall installations; rubber feet for desk applications
Cables
Sixteen 2ft (60cm) coax jumpers
Molded IEC power inlet cord 7(200cm)
Two ST-8016R RJ45-to-screw-terminal
 粤ICP备14091515号